Recent Activity

Activity stream for all registered members at Downeast Boat Forum.

  1. SeaKarma liked HUNTHARD's post in the thread ZIP WAKE Service..

    So i put on a pair in April and have been very pleased with how they perform. So much that I don't even want to use the boat without...

    Sep 16, 2019 at 2:31 AM
  2. WoundUpMarine replied to the thread Poking around ..

    Nice south shore, good looking boats.

    Sep 16, 2019 at 2:17 AM
  3. WoundUpMarine attached a file to the thread Turbo overspeed.

    That's an interesting scenario and I'm honestly surprised such a small engine would have a tachometer on the turbocharger turbine. Is...

    upload_2019-9-16_0-4-51.png Sep 16, 2019 at 12:51 AM
  4. leaky replied to the thread 25' alglass hull . what power ?.

    It's an odd hull - hard chine, looks like a deep V from the bow, then a real soft chine and cropped keel aft. Are they supposed to be...

    Sep 15, 2019 at 11:39 PM
  5. leaky replied to the thread New To Downeast Boating and North Shore Long Island Boating.

    Seemingly unlike others here I have a real comfort level w/ twin outboard boats too. But for me the hulls that are well suited for them...

    Sep 15, 2019 at 11:30 PM
  6. ArchHibb replied to the thread 36 Nauset flybridge.

    The commercial mold, yes. Think I found the answer: the 6BTA 370 puts out roughly 200 ft. lbs. more torque than my Cat.

    Sep 15, 2019 at 10:59 PM
  7. tunafishhkg replied to the thread Heading sensor location.

    You can mount in engine room port or starboard depending of where your wire run is located and you can get say 2ft or so from engine....

    Sep 15, 2019 at 10:48 PM
  8. leaky replied to the thread How thick should I plan my engine box?.

    Cool, thanks, after some more consideration I went with a 4 inch clearance measurement, 1 inch box, 1 inch insulation, and still lots of...

    Sep 15, 2019 at 10:45 PM
  9. Benny replied to the thread Heading sensor location.

    Great info, thanks for the reply. The engine is pretty dead center to the boat but I can easily mount it on either side of the cabin aft...

    Sep 15, 2019 at 10:43 PM
  10. leaky replied to the thread How thick should I plan my engine box?.

    Is on my mind at the moment as I leave clearance between where the engine box is going to be and a bunk on one side, step on the other....

    Sep 15, 2019 at 10:41 PM
  11. leaky liked Bill's post in the thread How thick should I plan my engine box?.

    Make it as small as possible with 1” of soundown or so

    Sep 15, 2019 at 10:27 PM
  12. leaky liked Diesel Jerry's post in the thread How thick should I plan my engine box?.

    No good options out there yet for that. No diesel or any engine for that matter is going to fit under the deck. Then you get into...

    Sep 15, 2019 at 10:27 PM
  13. leaky liked sockeye's post in the thread How thick should I plan my engine box?.

    Why a gas motor and engine box? A hybrid diesel-electric system would fit under your deck. The Holland is an excellent hull for quiet...

    Sep 15, 2019 at 10:27 PM
  14. leaky liked Downrigga's post in the thread How thick should I plan my engine box?.

    Seems to me and maybe I am wrong but if you have to have an engine box wouldn't you want it to be functional? Like making it a seat for...

    Sep 15, 2019 at 10:27 PM
  15. Steve Desmarais has a new avatar.

    Sep 15, 2019 at 10:18 PM
Loading...