2000 Eastern 27-10 (JC-27 hull) for sale.

Sea Lion

Member
Joined
Mar 15, 2019
Posts
15
Likes
17
Age
72
Selling our 2000 Eastern 27-10, Isabella, built on the JC 27-10 mold. She’s a good sea boat, well built, and very reliable. Not to be confused with the Eastern 27 that has the 8’ 3” beam, this boat does nicely in a three to four foot chop or a following sea. Cummins 6- BT 5 with 260 HP with a Twin Disc tranny. This boat was eight years in storage, 388 engine hours, and has been on the water only for the past 4-5 years. LOA is 29’, beam is 10’, draft is 3’0, and displacement is 8000. V-berth forward with sink and separate head. Full canvass enclosure. I’m asking $39,500. She can be seen in the Boothbay area. Please call or text me at 941-276-8434, reply to this forum, or email me at [email protected] if you have an interest. Thanks, Jeff W.


20160611_075857.jpg 20160611_080037.jpg 20190509_135617.jpg 20190509_135507.jpg 20160611_075857.jpg 20160611_080037.jpg 20190509_135617.jpg 20190509_135507.jpg 20160611_075857.jpg 20160611_080037.jpg 20190509_135617.jpg 20190509_135507.jpg 20160611_075857.jpg 20160611_080037.jpg 20190509_135617.jpg 20190509_135507.jpg
 

windwalker

New Member
Lite User
Joined
Aug 31, 2011
Posts
13
Likes
10

Sea Lion

Member
Joined
Mar 15, 2019
Posts
15
Likes
17
Age
72
The engine sits under a hatch on the captain's/mate's teak deck. There is a step down of about 8" to 9" just aft of the teak deck which I think you can make out on the two pictures I've added.
Engine access is through the hatch of course, and from aft of the ladder in the cockpit.

Jeff

20190509_135749.jpg

20190509_135701.jpg
 

windwalker

New Member
Lite User
Joined
Aug 31, 2011
Posts
13
Likes
10

Gurryman

Captain
Joined
Sep 6, 2012
Posts
1,205
Likes
756
Location
New Bedford MA
Boat Make
Nauset 28, Fortier 26, CuttyHunk 28 Molds
Just an FYI, That Cummins is a 210 or 220 HP, Not a 260.

and the exhaust looks like a disaster waiting to happen.

That said, It's a Nice Boat.
 
Last edited:

Sea Lion

Member
Joined
Mar 15, 2019
Posts
15
Likes
17
Age
72
Looks like I stand corrected. She was sold to me as a 260 HP, but now just checking the Cummins info I see the motor is rated at 210 HP. Thanks for the heads up. I've never been advised about nor had any trouble with the exhaust.
 

Gurryman

Captain
Joined
Sep 6, 2012
Posts
1,205
Likes
756
Location
New Bedford MA
Boat Make
Nauset 28, Fortier 26, CuttyHunk 28 Molds
is there a water-lift muffler in the system? or a straight through muffler? or just a straight pipe?
 

Yesac13

Senior Member
Joined
Mar 15, 2018
Posts
232
Likes
105
Age
39
Are you sure that eastern made that model
You can see the Eastern logo just forward of the stern on the sides.

It is quite different than most Eastern 27s, tho - most have pilot houses. Most have two portlights on the cabin sides not one. I had to look at others to finally see the common hull design. Definitely an Eastern 27 but most have I/O or outboard power.
 

yanmar

Captain
Joined
Aug 31, 2011
Posts
982
Likes
1,048
Location
Forked River, N.J. USA
Boat Make
26 chesepeake 22 tripp
You can see the Eastern logo just forward of the stern on the sides.

It is quite different than most Eastern 27s, tho - most have pilot houses. Most have two portlights on the cabin sides not one. I had to look at others to finally see the common hull design. Definitely an Eastern 27 but most have I/O or outboard power.
The ad states that the hull is a from a JC 27 mold . I would believe that considering that the beam is 10 ' . I owned a Judge 27 that was based off the Eastern 27 mold and the beam was 8'6" and was also a flush deck with a engine box that sat further back then the engine in the ad . So having owned a boat based off the Eastern mold I can assure you these are not the same boats .
 

Sea Lion

Member
Joined
Mar 15, 2019
Posts
15
Likes
17
Age
72
As it was told to me by the fellow I bought the boat from the hull was made off the JC27 mold by Eastern after they acquired it. The topsides were done by another shop, of whom I have no information. This might explain why she looks so different from other Eastern 27-10's and it is probably safe to presume that she is unique in her design. the original owner moved the boat to the midwest and used her very little before he passed away. The boat was in covered storage for the next eight years, or so I was told, and then bought and brought to Florida where the second owner found her to have too much draft for his liking in the shallow waters down there. I purchased her and had her brought back to New England where my wife and I have enjoyed her as a pleasure boat for the past three seasons. We have now opted to step down a bit to a trailerable boat with outboard (2019 Sisu 22) and need to sell Isabella.
 

Alzmore

New Member
Joined
Mar 15, 2018
Posts
9
Likes
8
Location
Milton NH
Website
www.easternboats.com
Boat Make
21 Seafarer
I work at Eastern and just had some people that have been here for a while take a look. It is a 27'10 and the boat was finished by another party. We did have it on display at a boat show, if I can find some pictures I will share.
 
Top Bottom